Personnel protection
Filters
Clear filter
Сортировать
Surgical gown model STANDARD/SMMS
-
- Made from non-woven four-layer material SMMS
- Wraparound back, sterile back cover
- Long fastening at the neckline, special cut of the raglan sleeves for maximum freedom of movement
- To comply with the rules of asepsis and ease of putting on, the gown is folded in a special way, the belt is equipped with a cardboard holder with two color zones
- Recommended for procedures with small to medium amounts of liquid
- Size range 44-48, 50-54, 56-60, 62-66
- Length of the product 110 cm, 140 cm
Подробнее
Скрыть
Surgical gown model STANDARD+/SMMMS
-
- Made from non-woven five-layer material SMMMS
- Wraparound back, sterile back cover
- Possesses increased strength characteristics and barrier properties
- Long fastening at the neckline, special cut of the raglan sleeves for maximum freedom of movement
- To comply with the rules of asepsis and ease of putting on, the gown is folded in a special way, the belt is equipped with a cardboard holder with two color zones/li>
- Recommended for procedures with small to medium amounts of liquid
- Size range 44-48, 50-54, 56-60, 62-66
- Length of the product 110 cm, 140 cm
Подробнее
Скрыть
Surgical gown model STANDARD SPECIAL PROTECTION
-
Standard with waterproof front and sleeves, sleeves and front in waterproof material140 cmSMMS / ЛАМSMMS4-layer non-woven fabric of different density (20 g/m², 35 g/m², 50 g/m²), two layers of spunbond, two layers of meltblown. The inner hydrophilic layer absorbs and passes moisture through, the meltblown absorbs and distributes it over the entire area of the material, the outer hydrophobic layer prevents the penetration of liquids from the outside. Gives a feeling of "dryness", has increased barrier properties.LAMINATED SPUNBONDCombined non-woven material of different density (40 g/m², 65 g/m²), first layer - spunbond, second layer - laminated coating. It has high barrier properties and protects against moisture
-
Standard with waterproof front and sleeves, sleeves and front in waterproof material with absorbent layer for comfort140 cmSMMS / М29SMMS4-layer non-woven fabric of different density (20 g/m², 35 g/m², 50 g/m²), two layers of spunbond, two layers of meltblown. The inner hydrophilic layer absorbs and passes moisture through, the meltblown absorbs and distributes it over the entire area of the material, the outer hydrophobic layer prevents the penetration of liquids from the outside. Gives a feeling of "dryness", has increased barrier properties.М29Two-layer non-woven material with a density of 36 g/m², the first layer is a micro-embossed polyethylene film that provides impermeability to liquids and bacteria, the second layer is polypropylene with absorbent properties.
-
Standard with extra protection, sleeve and front reinforcement integrated on the inside140 cmSMMS / ЛАМ / G72SMMS4-layer non-woven fabric of different density (20 g/m², 35 g/m², 50 g/m²), two layers of spunbond, two layers of meltblown. The inner hydrophilic layer absorbs and passes moisture through, the meltblown absorbs and distributes it over the entire area of the material, the outer hydrophobic layer prevents the penetration of liquids from the outside. Gives a feeling of "dryness", has increased barrier properties.LAMINATED SPUNBONDCombined non-woven material of different density (40 g/m², 65 g/m²), first layer - spunbond, second layer - laminated coating. It has high barrier properties and protects against moistureGOWNACE 72®Trekhsloynyy netkanyy material plotnostʹyu 60 g/m² obespechivayet 100% zashchitu ot mikrobnoy pronitsayemosti, vozdukhoobmen ne meneye 6500 g/m²×24 ch. (yavlyayet·sya «dyshashchim»). Pervyy sloy — netkanyy material golubogo tsveta s vodoottalkivayushchimi svoystvami, vtoroy sloy — polietilenovaya plenka s mikrorelʹyefom, tretiy sloy — netkanyy material golubogo tsveta s vodoottalkivayushchimi svoystvami Three-layer non-woven material with a density of 60 g/m² provides 100% protection against microbial permeability, air exchange is not less than 6500 g/m²×24 hours (is "breathable"). The first layer is a blue water-repellent non-woven fabric, the second layer is a micro-embossed polyethylene film, the third layer is a blue water-repellent non-woven fabric
-
Standard with extra protection, sleeve and front reinforcement built in on the inside and lined with an absorbent layer for comfort140 cmSMMS / М29SMMS4-layer non-woven fabric of different density (20 g/m², 35 g/m², 50 g/m²), two layers of spunbond, two layers of meltblown. The inner hydrophilic layer absorbs and passes moisture through, the meltblown absorbs and distributes it over the entire area of the material, the outer hydrophobic layer prevents the penetration of liquids from the outside. Gives a feeling of "dryness", has increased barrier properties.М29Two-layer non-woven material with a density of 36 g/m², the first layer is a micro-embossed polyethylene film that provides impermeability to liquids and bacteria, the second layer is polypropylene with absorbent properties.
-
Размерный ряд 44-48, 50-54, 56-60, 62-66
Подробнее
Скрыть
Surgical gown model COMFORT/S
-
Robe110 см
140 cmSSAirtight non-woven material based on cellulose fiber with special impregnation, density 70 g/m². By tactile sensations comparable to cotton materials. Has high protective and strength characteristics -
- Made from comfortable, water-repellent material with good breathability
- Wraparound back, sterile back cover
- Long fastening at the neckline, special cut of the raglan sleeves for maximum freedom of movement
- To comply with the rules of asepsis and ease of putting on, the gown is folded in a special way, the belt is equipped with a cardboard holder with two color zones
- Recommended for procedures with small to medium amounts of liquid
- Size range 44-48, 50-54, 56-60, 62-66
Подробнее
Скрыть
Surgical gown model COMFORT SPECIAL PROTECTION
-
Comfort with waterproof front and sleeves, sleeves and front in waterproof material140 cmS / ЛАМSAirtight non-woven material based on cellulose fiber with special impregnation, density 70 g/m². By tactile sensations comparable to cotton materials. Has high protective and strength characteristicsLAMINATED SPUNBONDCombined non-woven material of different density (40 g/m², 65 g/m²), first layer - spunbond, second layer - laminated coating. It has high barrier properties and protects against moisture
-
Comfort with water-resistant front and sleeves, sleeves and front in water-resistant material with an absorbent layer for comfort140 cmS / М29SAirtight non-woven material based on cellulose fiber with special impregnation, density 70 g/m². By tactile sensations comparable to cotton materials. Has high protective and strength characteristicsМ29Two-layer non-woven material with a density of 36 g/m², the first layer is a micro-embossed polyethylene film that provides impermeability to liquids and bacteria, the second layer is polypropylene with absorbent properties.
-
Comfort with extra protection, reinforced sleeves and front are built-in on the inside and covered with an absorbent layer for comfort140 cmS / М29 / G72SAirtight non-woven material based on cellulose fiber with special impregnation, density 70 g/m². By tactile sensations comparable to cotton materials. Has high protective and strength characteristicsМ29Two-layer non-woven material with a density of 36 g/m², the first layer is a micro-embossed polyethylene film that provides impermeability to liquids and bacteria, the second layer is polypropylene with absorbent properties.GOWNACE 72®Trekhsloynyy netkanyy material plotnostʹyu 60 g/m² obespechivayet 100% zashchitu ot mikrobnoy pronitsayemosti, vozdukhoobmen ne meneye 6500 g/m²×24 ch. (yavlyayet·sya «dyshashchim»). Pervyy sloy — netkanyy material golubogo tsveta s vodoottalkivayushchimi svoystvami, vtoroy sloy — polietilenovaya plenka s mikrorelʹyefom, tretiy sloy — netkanyy material golubogo tsveta s vodoottalkivayushchimi svoystvami Three-layer non-woven material with a density of 60 g/m² provides 100% protection against microbial permeability, air exchange is not less than 6500 g/m²×24 hours (is "breathable"). The first layer is a blue water-repellent non-woven fabric, the second layer is a micro-embossed polyethylene film, the third layer is a blue water-repellent non-woven fabric
-
Size range 44-48, 50-54, 56-60, 62-66
Подробнее
Скрыть
Surgical gown model PROTECTION / GOWNACE
-
- Made of 3-layer non-woven material, provides 100% protection against microbial permeability throughout the surface
- Provides air circulation for at least 6 500 g/m2 * 24 ч
- Wraparound back, sterile back cover
- Long fastening at the neckline, special cut of the raglan sleeves for maximum freedom of movement
- To comply with the rules of asepsis and ease of putting on, the gown is folded in a special way, the belt is equipped with a cardboard holder with two colorzones
- Recommended for procedures with a significant amount of liquid
- Size range 44-48, 50-54, 56-60, 62-66
- Length of the product 110 cm, 140 cm
Подробнее
Скрыть
Beanie «Charlotte»
-
BeanieSMMS / ВискозаSMMS4-layer non-woven fabric of different density (20 g/m², 35 g/m², 50 g/m²), two layers of spunbond, two layers of meltblown. The inner hydrophilic layer absorbs and passes moisture through, the meltblown absorbs and distributes it over the entire area of the material, the outer hydrophobic layer prevents the penetration of liquids from the outside. Gives a feeling of "dryness", has increased barrier properties.VISCOSEGreen and white material. Polypropylene-based non-woven material with a density of 25 g/m² containing viscose fibres.
-
For single use in the operating room and hospital or as a headgear for the patient. Medical cap in the form of a beret, assembly on both sides, soft elastic band securely fixes and does not leave a mark on the face after long-term wearing. Suitable for long and voluminous hair.
Подробнее
Скрыть
Puff hat
-
BeanieSMMS / ВискозаSMMS4-layer non-woven fabric of different density (20 g/m², 35 g/m², 50 g/m²), two layers of spunbond, two layers of meltblown. The inner hydrophilic layer absorbs and passes moisture through, the meltblown absorbs and distributes it over the entire area of the material, the outer hydrophobic layer prevents the penetration of liquids from the outside. Gives a feeling of "dryness", has increased barrier properties.VISCOSEGreen and white material. Polypropylene-based non-woven material with a density of 25 g/m² containing viscose fibres.
-
Takes a round shape for single use in hospitals and clinics or as a headgear for the patient and medical staff. Meets the requirements of any type of operation, any shape and size of the head. The large size of the cap provides comfortable use for lush hairstyles. When folded, it is compact and easy to store.
Подробнее
Скрыть
Hat-cap (with or without collar)
-
BeanieSMMS / ВискозаSMMS4-layer non-woven fabric of different density (20 g/m², 35 g/m², 50 g/m²), two layers of spunbond, two layers of meltblown. The inner hydrophilic layer absorbs and passes moisture through, the meltblown absorbs and distributes it over the entire area of the material, the outer hydrophobic layer prevents the penetration of liquids from the outside. Gives a feeling of "dryness", has increased barrier properties.VISCOSEGreen and white material. Polypropylene-based non-woven material with a density of 25 g/m² containing viscose fibres.
-
Cap surgical cylindrical shape with a special cut of the occiput. Suitable for long-term wear, provides a reliable level of personnel protection, with ties for connection at the back of the head. Easy to use for short and long hair. Collar width 4 cm.
Подробнее
Скрыть
Surgical cap «Astro» (with sweat absorbent strip or without sweat absorbent strip)
-
BeanieSMMS / ВискозаSMMS4-layer non-woven fabric of different density (20 g/m², 35 g/m², 50 g/m²), two layers of spunbond, two layers of meltblown. The inner hydrophilic layer absorbs and passes moisture through, the meltblown absorbs and distributes it over the entire area of the material, the outer hydrophobic layer prevents the penetration of liquids from the outside. Gives a feeling of "dryness", has increased barrier properties.VISCOSEGreen and white material. Polypropylene-based non-woven material with a density of 25 g/m² containing viscose fibres.
-
For single use in the operating room. The medical cap should have a special cut with additional volume to cover long hair and a soft elastic band along the back edge at the back of the head
The middle part of the cap is a stripe wide 4,5 ± 0,5cm for absorbing vapors from the forehead and temples from non-woven fabric.
Подробнее
Скрыть
Headscarf
-
BeanieSMMS / ВискозаSMMS4-layer non-woven fabric of different density (20 g/m², 35 g/m², 50 g/m²), two layers of spunbond, two layers of meltblown. The inner hydrophilic layer absorbs and passes moisture through, the meltblown absorbs and distributes it over the entire area of the material, the outer hydrophobic layer prevents the penetration of liquids from the outside. Gives a feeling of "dryness", has increased barrier properties.VISCOSEGreen and white material. Polypropylene-based non-woven material with a density of 25 g/m² containing viscose fibres.
-
Medical cap with a special cut in the back of the head. Easy to use for short hair. Fastened with ties.
Подробнее
Скрыть
Cap-helmet anti-epidemic
-
BeanieSMMS / ВискозаSMMS4-layer non-woven fabric of different density (20 g/m², 35 g/m², 50 g/m²), two layers of spunbond, two layers of meltblown. The inner hydrophilic layer absorbs and passes moisture through, the meltblown absorbs and distributes it over the entire area of the material, the outer hydrophobic layer prevents the penetration of liquids from the outside. Gives a feeling of "dryness", has increased barrier properties.VISCOSEGreen and white material. Polypropylene-based non-woven material with a density of 25 g/m² containing viscose fibres.
-
Designed to protect medical personnel providing medical care to patients with especially dangerous infections, there is a cape, intercepted with ties in the neck.
Подробнее
Скрыть
Filters
- Category
- All subcategories
Back
Back